Hermes Vector

World

NTSB: Florida helicopter crash happened after aircraft flew extremely low

A Robinson R44 II helicopter crashed in Biscayne Bay on Nov. 4, killing the pilot and critically injuring a photographer and videographer, the NTSB says.

By Hermes Vector

Also in: Português · Français · Deutsch

Checked against 2 sourcesthestar.combozemandailychronicle.com
Illustration for: NTSB: Florida helicopter crash happened after aircraft flew extremely low

In brief

  • A Robinson R44 II helicopter crashed in Biscayne Bay on Nov. 4, killing the pilot and critically injuring two others.
  • The NTSB says the helicopter was flying extremely close to the water when its rotor blades struck the surface during a turn.
  • The aircraft was filming a powerboating event offshore near Bill Baggs State Park off Key Biscayne.
  • Rescue workers from local agencies, the U.S. Coast Guard, and U.S. Customs and Border Protection responded to the crash.

NTSB: Florida helicopter crash happened after aircraft flew extremely low

A helicopter that crashed earlier this month in Biscayne Bay, killing one person and critically injuring two others, had been flying so low that it hit the water on a turn, the National Transportation Safety Board said Wednesday.

The Robinson R44 II helicopter went down Nov. 4 near Bill Baggs State Park off Key Biscayne while on a trip to film a powerboating event offshore, the Miami-Dade Sheriff’s Office said. The pilot died, and a photographer and videographer on board were injured.

The helicopter was making low-altitude turns “extremely” close to the surface of the water, according to the safety board’s preliminary report. Some of the helicopter’s doors had been removed to facilitate photography and videography. On one turn, the rotor blades hit the water and brought down the aircraft.

The photographer told investigators the helicopter flew low and parallel to a boat’s right side, then turned and got ahead of it for a “good shot” as the boat passed underneath, according to the report. Then the videographer observed the rotor blades strike the water.

Television news video of the crash showed the helicopter upside down underwater with two yellow floats attached to the bottom of its landing skids. Those emergency floats are designed to help keep a helicopter afloat in a water landing.

Witnesses in nearby boats made distress calls, and a good Samaritan tried to help one of the victims, Sheriff Rosie Cordero-Stutz said. Rescue workers from several local agencies, as well as the U.S. Coast Guard and U.S. Customs and Border Protection, responded to the crash.

Why it matters

The preliminary NTSB report indicates the crash occurred during low-altitude filming operations, with the aircraft’s rotor blades striking the water during a turn. The removal of some doors to facilitate photography and videography is noted in the report as a detail of the flight configuration.


Sources

This article was drafted with AI assistance and checked against the sources above. Company claims are reported as claims. Cover image is AI-generated.

Questions readers ask

What caused the helicopter crash in Biscayne Bay?
The National Transportation Safety Board stated the helicopter flew extremely low and hit the water on a turn, causing the rotor blades to strike the surface and bring down the aircraft.
Who was injured or killed in the Nov. 4 crash?
The pilot died, while a photographer and a videographer on board were critically injured.
What modifications were made to the Robinson R44 II helicopter before the crash?
Some of the helicopter's doors had been removed to facilitate photography and videography during the trip to film a powerboating event.
Which agencies responded to the crash near Bill Baggs State Park?
Rescue workers from several local agencies, the U.S. Coast Guard, and U.S. Customs and Border Protection responded to the incident.

The day's checked news, by email

One short email a day with the top stories. Free, and you can unsubscribe in one click.

Or follow for the latest news:

How do you feel about this story?

Comments 0

No comments yet. Start the discussion.